Goo Gone is one of the most effective ways to remove adhesive, stickers, and other residues from various surfaces. You can use Goo Gone on wood, fabric, and carpet without damaging or discoloring the material. But can you use Goo Gone on glass shower doors?
Goo Gone is safe to use on glass shower doors as long as they aren’t frosted or coated. Before using Goo Gone on glass, test a small area. If it doesn’t etch or discolor the surface, apply the substance to a cloth or sponge and rub the glass in a circular motion until the residue is gone.
Let’s take a closer look at what Goo Gone can be used for, how to use it properly, and some alternatives to consider for cleaning your glass shower doors.
What Is Goo Gone Used For?
Goo Gone (on Amazon) is an adhesive remover made of citrus extracts, natural oils, and other solvents. It’s available in liquid and spray form and removes sticky residue from various surfaces.
Stickers and labels, sap, tar, gum, glue, wax, and permanent marker are everyday household messes that Goo Gone helps to remove.
Goo Gone is safe to use on a range of materials, such as metal, wood, plastic, tile, carpet, fabric, and painted surfaces. But it’s important to test the product in an inconspicuous area first to ensure no discoloration or damage occurs.
Avoid using Goo Gone on silk, leather, suede, or rubber, as it may cause discoloration. If you must use it on those materials, apply Goo Gone sparingly and test a small area first.
The active ingredients in Goo Gone are citrus extracts, which are low in toxicity, but the product also contains petroleum distillates, which can cause skin irritation and respiratory issues.
Use Goo Gone in well-ventilated areas and avoid contact with the eyes and skin to prevent irritation.
Can You Use Goo Gone on Glass Showers?
Yes. Using Goo Gone to clean and remove residue from glass shower doors is an alternative to harsher chemical cleaners and intensive scrubbing.
The Spray Gel formula (on Amazon) is best for showers because it won’t drip or run. For this reason, it’s easier to apply and will stay in place for better results.
To clean a glass shower door with Goo Gone, follow these steps:
- Spray a small amount of Goo Gone onto the glass surface and allow it to sit for a few minutes.
- Gently scrub with a soft sponge or cloth in a circular motion, taking care not to scratch the glass surface.
- If the residue is especially stubborn, you may need to remove it with the help of a plastic scraper (on Amazon).
- After you’ve removed the residue, rinse the area with hot, soapy water and dry it with a cloth.
It’s important to note that if you have coated or frosted glass, you should avoid using Goo Gone because it could damage the finish.
Using too much Goo Gone can also cause a cloudy residue on the glass surface. If this happens, use a mild soap or glass cleaner and water to remove it.
Other Ways to Clean a Glass Shower Door
If you don’t want to use Goo Gone or have coated or frosted glass, there are a few other options for cleaning your glass shower door:
Vinegar
White vinegar is a natural and effective cleaning agent that you can use full-strength or diluted, depending on the buildup you’re trying to remove.
If you dilute it, mix equal parts of white vinegar (on Amazon) and water. Then spray the mixture onto the glass surface and scrub with a non-abrasive sponge. Follow up by thoroughly rinsing with water and drying with a clean cloth.
Vinegar is safe for most glass shower doors, but it’s always best to test in an inconspicuous area first.
Ammonia
Ammonia is a powerful cleaner that can quickly cut through dirt and grime, making it ideal for tougher jobs.
To use ammonia to clean your shower door:
- Mix one part ammonia (on Amazon) with three parts water and put the mixture in a spray bottle.
- Spray the solution onto the door and let it sit for around 10 minutes, so it has time to loosen the dirt and grime.
- Take a soft cloth or sponge and scrub the door gently to remove the residue.
- Finish by rinsing the door and buffing it dry.
Rejuvenate Soap Scum Remover
Rejuvenate Soap Scum Remover (on Amazon) is a cleaning product designed to remove soap scum and hard water buildup from glass surfaces. It works quickly with minimal scrubbing required, so it’s ideal if you have a lot of buildup to remove.
To use Rejuvenate Soap Scum Remover:
- Start by spraying the solution onto the surface of your shower door.
- Allow it to sit for a few minutes before rinsing it off.
- If the soap scum is stubborn, reapply, let it sit, then scrub with a soft cloth or sponge.
Tips for Using Goo Gone
Goo Gone is a great product to have on hand for various cleaning tasks, but it’s essential to use it safely and carefully. To get the best results:
- Apply Goo Gone sparingly and test a small area first before treating larger areas.
- Wear protective gloves when applying Goo Gone, and make sure you’re working in an area with good ventilation.
- Avoid using Goo Gone on wood, fabric, unsealed stone or marble surfaces, suede, leather, silk, and any materials that cannot withstand solvents.
- Keep in mind that Goo Gone is flammable and should be kept away from heat and open flames.
- Always read the label before using and follow the manufacturer’s instructions carefully.
Goo Gone can help you quickly and easily remove tough stains and residue from many surfaces when used correctly. Keep these tips in mind to make sure you get the best results.