Of all the cleaning products you might have in your arsenal, Lime-A-Way is one of the most versatile. This acidic cleaner can take care of everything from lime and calcium buildup to tough soap scum and hard water stains. But can you use Lime-A-Way on glass shower doors?
Lime-A-Way is a powerful acidic cleaner that’s safe to use on glass shower doors. Generously spray the shower door and let it sit for a few minutes. Wipe with a clean, damp sponge and rinse the surface. Don’t apply the product to metal fixtures, as it can cause etching and discoloration.
Let’s take a closer look at how to properly use Lime-A-Way on glass shower doors and how to avoid streaking in the process. We’ll also review some tips for keeping your shower doors clean in the long run.
Can You Use Lime-A-Way on Glass Shower Doors?
Yes. Lime-A-Way (on Amazon) is ideal for glass shower doors because it contains ingredients to dissolve mineral buildup that can be difficult to remove using other cleaners.
This product can safely clean limescale, soap scum, hard water deposits, mildew, and other accumulated debris by quickly and effectively breaking them down, so you only have to spray, wait, and rinse.
Will Lime-A-Way Damage Glass or Leave Streaks?
No, Lime-A-Way will not cause any damage or leave streaks on glass. You can also use it on other non-porous bathroom surfaces, such as ceramic tile, porcelain, and some stainless steel. To prevent streaks, use a microfiber cloth (on Amazon) to buff the surface dry after cleaning.
While Lime-A-Way is safe on various surfaces, it contains hydrochloric acid, which is corrosive and should be used with caution. Avoid using the product on marble, granite, stone, grout, or aluminum, as it can cause discoloration, etching, or other damages.
Read the product label carefully and always test a hidden area before using Lime-A-Way on any surface. It’s also important to use protective gloves while using the product.
How to Remove Hard Water Stains With Lime-A-Way
Lime-A-Way makes it easy to remove hard water spots from glass shower doors. Here’s a step-by-step guide:
- Begin by cleaning the surface to remove loose debris, and use a squeegee to dry the surface.
- Spray on a liberal amount of Lime-A-Way and allow it to sit for several minutes.
- Rinse away with warm water. If there are stubborn areas, gently scrub with a sponge or soft cloth until you’ve removed all grime and residue from the glass.
- Rinse thoroughly with warm water.
- If there are still areas with debris, spot treat and repeat the process until all residue is gone.
- Do a final rinse. Use a squeegee to remove excess water and buff it with a dry cloth for a streak-free finish.
- Because of its corrosive nature, avoid applying Lime-A-Way to stainless steel, brass, and chrome fixtures. If any product gets on these surfaces, use a damp cloth to wipe it off immediately and thoroughly rinse it with warm water.
How to Maintain Clean Glass Shower Doors
After removing built-up residue, you can take a few steps to maintain clean glass shower doors and lessen the time spent on scrubbing in the future:
- Use a squeegee (on Amazon) after each shower. This simple step eliminates much of the soap scum and hard water deposits that can accumulate.
- Apply a shower coating (on Amazon). These sprays create a protective barrier on the glass to repel help repel hard water deposits, soap scum, and mildew, making it easier to clean during routine maintenance.
- Keep the shower dry. Ensure proper ventilation in your bathroom so it doesn’t get too humid, as excessive moisture can contribute to soap scum and mildew buildup.
- Clean regularly. Try to clean your shower doors at least once every week or two using an all-purpose cleaner or 50/50 vinegar solution to remove hard water spots, soap scum, and mildew that can build up and become harder to clean later on.