Eyeglasses help improve vision and are constantly exposed to the elements. Their design also protects your eyes from foreign substances. Your eyeglasses may accidentally get stains from adhesives such as superglue. But can you use products like Goo Gone to clean the lenses?
Goo Gone is a reliable adhesive remover that is safe on your eyeglasses. To clean off sticky stains, apply it on the area of the glasses with residue, leave it for some time, and then wipe it off using a clean cloth. Then wash the glasses with warm soapy water, and your glasses will be clear.
Dirty eyeglasses can distort your vision, causing eyestrain and even headaches. So it would be best if you routinely cleaned your eyeglasses for optimal vision and to prolong their lifetime. Now let’s learn more about Goo Gone and how it can clean your eyeglasses.
Is Goo Gone Safe to Use on Eyeglasses?
Yes. Goo Gone is safe to use on eyeglasses. It is reliable and can be used on different surfaces and materials.
Although glue is a valuable product with varying household uses, it may accidentally spill and stick to unwanted surfaces like your eyeglasses. Goo Gone adhesive remover is a relief for such tricky situations. It works on all types of lenses, including fiberglass.
Goo Gone is safe for many materials, such as aluminum, fabric, and sealed stone. However, avoid using this product on materials like leather, suede, rubber, and silk.
How to Clean Glasses with Goo Gone
Eyeglasses are unclear and have distorted vision when covered in residue or glue. The Goo Gone Spray Gel (on Amazon) helps break down the adhesive and quickly removes any sticky residue on your eyeglasses.
This product works on a wide range of adhesives and glues for added convenience. Use it to restore the clarity of your glasses quickly.
Follow the steps below to clean your glasses using Goo Gone:
- Wash off dirt and debris from your glasses using lotion-free dishwashing soap and warm water.
- Rinse the eyeglasses with warm water.
- Pat the eyeglasses dry using a soft cloth.
- Apply Goo Gone on the area with glue or residue.
- You can apply the product directly or use a cloth.
- Give Goo Gone a few minutes to break down the adhesive.
- Gently rub the glass using a cloth.
- Wipe the surface clean.
- Clean the glasses with dishwashing soap (on Amazon) and water or a lens cleaner.
- Rinse the eyeglasses and wipe them dry with a microfiber cloth.
Before using Goo Gone on eyeglasses, test it on an inconspicuous area to ensure it doesn’t cause damage. Goo Gone may damage the protective coatings on some lenses, so take extra caution.
Don’t Have Goo Gone? Here are Some Alternative Methods
It would be best to consider various factors before removing sticky residue or adhesives like superglue from eyeglasses. These include the lens material and whether they have a coating such as UV protection or anti-glare coatings.
If you don’t have Goo Gone available, you can use the following alternative methods:
Water and Dishwashing Liquid
Water is the safest method for glasses with coatings. Most adhesives soften when exposed to water for prolonged periods.
You will need water, ammonia-free dishwashing liquid soap, a soft cloth, and plastic wrap to use this process. Follow the steps below to remove the glue:
- Mix some ammonia-free liquid dishwashing (on Amazon) soap in water.
- Dip a soft cloth folded cloth in the soapy water to wet it—You can also soak the glasses, but this would also loosen the glue that holds lenses on the frames.
- Press the cloth over the glue or residue.
- Wrap the cloth and glasses with plastic wrap to seal in the moisture.
- Let the glasses soak for at least three hours.
- Remove the plastic wrap and use a damp cloth to wipe off the softened glue.
- If the glue doesn’t soften, use warm water when soaking.
- When glasses are clean, dry them with a soft cloth to prevent water marks.
You can use isopropyl alcohol to clean both plastic and glass lenses. If the glasses have a coating, test this procedure along the corner of one edge to avoid damaging the coating.
Cleaning glasses using alcohol requires the following supplies:
- Soft cloth
- Isopropyl alcohol (on Amazon)
- Razor blade
- Mild soap
Follow the steps below to remove the glue:
- Moisten a cloth with isopropyl alcohol.
- Use the cloth to rub off the glue.
- Rotate the fabric to a new area as adhesive gets transferred onto it.
- Clean the glasses with mild soap and water.
- Dry the lenses clean with a microfiber cloth.