Using Magic Eraser On Glass: Safety And How-To

As an Amazon Associate we earn from qualifying purchases made on our website.

Magic Erasers are often used for a variety of materials, such as painted walls and wood. However, when it comes to glass, it’s hard not to be skeptical. After all, once there’s a scratch on the glass, whether that’s your window glass or shower door, it ruins the whole look. 

Magic Erasers are made of melamine foam and are safe on glass, except for the extra durable kind designed for tiles and bathtub grime. Activate the eraser with water before using it to prevent scratches, and if there are abrasive particles stuck in the eraser, discard it and use a new one.

So is it safe to use Magic Eraser on glass, or will it end up leaving some ugly scratches and marks? Let’s see the answers to that, along with the steps to clean a glass shower door and a glass stove top using Magic Eraser without causing any damage.  

Is it Safe to Use a Magic Eraser on Glass? 

Melamine sponges on pink background

Magic eraser (on Amazon) is known for its ability to clean stubborn spots and stains on glass. And except for the Magic Eraser Extra Durable, designed for tiles and bathtubs, Magic Eraser won’t scratch the glass. 

This is because it’s made of melamine foam, which isn’t abrasive but effectively removes embedded substrates on different surfaces.

Will Magic Eraser Leave Scratch Marks on Glass?

The only magic eraser variant that will leave scratch marks on glass is the extra durable kind designed for bathtub and tile grime. Magic Eraser Extra Durable features micro scrubbers that help remove tough stains and aren’t suitable for use on glass.

Other Magic Eraser variants won’t scratch the glass as long as you’re careful. You can use a new Magic Eraser with a cleaning detergent and warm water to clean the dirt and grime. Ensure the sponge is maintained well, and rinse it well so that no particles are trapped inside it. 

As soon as the sponge starts to tear, discard it immediately. Remember that Magic Eraser sponges aren’t meant for multiple uses. Hard abrasive particles tend to get trapped in the sponge, and if you’re not careful, you might end up scratching the surface.   

You should also avoid using dry magic erases or glass. Instead, always make sure to keep it wet while cleaning it.

How to Use Magic Eraser to Clean a Glass Shower Door 

Using a Magic Eraser to clean the glass shower door is easy and involves two steps. You can use Magic Eraser Bath for this purpose. 

Step 1: Wet the Eraser

Before you start, wet the Magic Eraser to activate the micro-scrubbers. These will dig deep and help remove hard water and soap scum stains from the glass to make cleaning easier. Squeeze the sponge to remove extra water from the eraser before using it. 

Step 2: Start Wiping 

Whether there’s grime, soap scum, or hard water stains on your shower glass door, all you have to do is wipe the Magic Eraser across the door with a steady and firm hand. With just a few wipes, you’ll be able to break through the hard water and soap scum and have shiny shower doors in no time.

How to Use Magic Eraser to Clean a Glass Stove Top 

Melamine sponges on pink background

Cleaning a glass stove top using the Magic Eraser Kitchen with Dawn dish soap is easy. Here’s what you have to do:

  1. First, make sure that the stovetop is cool and dry.
  1. Next, activate the Magic Eraser by wetting it.
  1. Squeeze the eraser to remove excess water so you can use it for scrubbing.
  1. Use circular motions to scrub the glass until you get rid of the cloudiness and stains.   
  1. Remove excess suds using a wet sponge.
  1. Allow the glass to dry.

Cleaning a Burnt Glass Stove Top

The process will differ slightly if you have a burnt glass stove top. Here’s what you have to do:

  1. First, completely cover the burnt glass with dish soap.
  1. Next, spray white vinegar on the affected area until it starts to foam or bubble.
  1. Use a Magic Eraser or a regular sponge to rub the solution into the burnt stove top. 
  1. Let the mixture sit for around 30-45 minutes.
  1. Again, use a Magic Eraser or a regular sponge to scrub the area and loosen stains, burnt marks, etc.
  1. Next, use a glass-rated razor to get rid of the burnt sections.
  1. Use a dry, soft cloth to wipe the entire area and absorb all the moisture.
  1. Finally, use a Magic Eraser to brush the glass until it’s squeaky clean.

Leave a Comment